Many types of apparatus are used for scientific work in laboratories. however, we have compiled all possible common and comprehensive lists of 20
NOW!
Some of the items of common laboratory apparatus used in the laboratory are shown below. Names and functions of the apparatus used in the laboratory are:
A Bunsen burner is a source of heat or mechanical appliances for which absolute safety is required while using Bunsen Burner. it is linked to a flammable gas source. Mostly a knob is used to adjust the gas flow amount and a pivot collar that manages airflow. Both the knob and collar must be adjusted to get an excellent flame for heating things.
It is usually made of stainless steel or Aluminium having three supporting legs. The apparatus to be heated is placed on the tripod stand. It is mainly used to support or hold the beakers or flasks during the experiments. A Bunsen burner is placed underneath the tripod stand due to its height.
It is the iron wire gauze piece posted with asbestos in the center. It is placed on the tripod stand so that the flame does not touch the glass apparatus directly, reducing the danger of its breaking.
A test tube is a glass tube with one end closed and the other end open. The closed-end is in a round shape. Test tubes are used in laboratories to hold small samples. They are mainly used for qualitative comparison and assessment. A very commonplace to see test tubes is the biochemistry lab. When large numbers of the sample are needed to be compared and tested, these test tubes are used to make this easier. They are also easily covered or capped with a glass or rubber stopper.
Safety Tip: Never heat a covered or capped test tube.
Beakers are a very common laboratory instrument and are widely useful in the laboratory as a reaction container. they are also used for holding liquid and solid samples or catch liquids from different titrations or filtrates from filtering operations. A beaker is a simple can in most labs. It is used for heating, stirring, and mixing chemicals. Most beakers have spouts on their rims to easy pouring.
They also usually have lips around their rims and markings to measure the volume of liquid they contain. They are not a piece of proper equipment to measure liquids. Beakers are available in a wide range depending on their sizes, such as 50cm3, 100cm3, 250cm3, or 500cm3 are available.
It is also known as a Conical Flask. The Erlenmeyer flask was titled in 1861, after its inventor. It has a slim neck and widens toward its base. This allows easy swirling and mixing of the flask without too much possibility of spilling. The narrow opening also allows the use of a glass or rubber stopper. It can comfortably be clamped to a ring stand as well as shaken or heated easily. Once again, the numberings on the side are meant mainly for estimation not for precision.
Safety Tip: A significant safety tip here is to never heat the flask while it is covered. This causes pressure build-up that results in an explosion.
A lab funnel is also like any other funnel but it was specially designed to be used in a laboratory. They are made up of glass or plastic and have either a long stem or a short stem, depending on the purpose, they are needed for. There are a lot of sizes that can be chosen depending upon the amount of liquid that needs to go through them easily and quickly. Funnels are of different sizes 3cm, 5cm, 8cm etc.
It is a small dish made of porcelain used for evaporating and concentrating the dilute solutions. It is available in different sizes.
This is an essential measuring tool for the volume of any liquid. There are a lot of markings, up and down the whole length of the container with special increments. Graduated cylinders are of many sizes. The smaller they are in size or diameter, the more exact or accurate the volume measurements will be. When reviewing the volume from a graduated cylinder, you will consider that the liquid seems to have some indentation.
The liquid around the edges of Graduated Cylinders will be higher than the liquid in the center. This is known as a meniscus. Keep the cylinder at a leveled surface to properly read the volume. They are also available in different sizes 5cm3, 10cm3, 20cm3, 50cm3, 100cm3 and 1000cm3.
A stirring Rod or glass stirring rod is used for mixing and stirring different chemicals. it is made up of solid glass (borosilicate or ) having rounded edges slightly thick and longer than a soda water straw. Stirring Rods are often 10 to 45 cm long with almost a half-centimeter in diameter. it is also available in the triangular paddle, flat paddle, or round button shape.
A volumetric flask is a round flask with a flat bottom and long neck. Volumetric Flask is used to measure the exact volume of liquids. There is a short line on the neck that hints at how far to fill the flask. Special caps are available that will not let anything in or out through the flask. These are available in different sizes i.e., 100cm3, 250cm3, 500cm3 and 1000 cm3.
Just Remember: The temperature affects the volume; therefore always avoid using liquids that will vary in temperature (for example hot water that will cool).
Burets are often used for the addition of a precise and accurate volume of liquids. with the use of burets, you can measure or determine the volume of liquids up to nearly 0.01 mL. These are normally attached to a ring stand with a clamp. A buret is also like a glass tube that is open from the top and becomes a narrow pointed opening at the bottom side. Right above the bottom opening; there is a stopcock.
This stopcock can be turned to control the released amount of liquid. There are also certain markings along the length of the buret that indicates the volume of any liquid present in them. A buret is especially used for the extremely accurate addition of liquids. By slightly adjusting the stopcock, the amount of releasing liquid can be slowed down to a single drop every few seconds.
Buret is one of the most accurate tools in the laboratory. To determine the added amount of liquid in solution, write down the readings, how much is present initially in the buret. Then when you were finished adding liquids, write down how much liquid is left. Now, Subtract the final amount of liquid from the initial amount and you have the exact volume of liquid that is added.
Forcep is derived from the Latin word forcipes used for holding and grasping small objects in laboratories. they are used when things are picked up in bulk or when large fingers are unable to collect little and tiny things. besides this, “forceps” is a very common word in the medical field. in the common world, forces are referred to different names like pliers, tweezers, clip, stongs, or clamps, etc. basically there are two major types of forceps:
There is a large variety of pipettes that are designed to accomplish many specific goals. However, they all are for measuring the exact volume of liquids and then placing liquids into the other containers. Generally available sizes are 10cm3, 20cm3 and 25cm3.
The temperature of a substance is measured using a thermometer. The temperature in the laboratory is usually measured in units of degrees Celsius (˚C).
The Bunsen burner is lightened by the striker.
A watch glass circular convex or concave rounded piece of the glass often used to hold a small amount of solid or liquid, to evaporate a liquid, while being weighed, and for many other purposes. Watch Glasses are also used for different purposes like evaporation.
it can also work as a lid for a beaker to prevent dust from entering a beaker. in the chemistry Lab, two types of Watch glasses are used such as glass watch glasses and plastic watch glasses. both types have various sizes and varieties in the market. the glass type is more famous than plastic type. Most glass type is reused and plastic-type are disposable i.e., for one-time use.
Pipet Bulb is used to draw different liquids into the pipet.
It is used for hanging (thermometer), clamping/holding (burette, round bottom flask, etc.).
ring clamp is used with a ring stand to hold different types of glassware like funnel or beaker.
Nowadays polythene wash bottles are used in the laboratory for storing distilled water for various operations such as transferring precipitates from a container to the filter paper or washing the precipitates. When the bottle is pressed with hand, water comes out through the jet in the form of a fine stream.
It is also known as a boiling flask. Florence flask contained a round bottom with a long neck. It is used for holding liquids and can easily be heated and swirled. It can also be capped by glass or rubber stoppers easily. Once again, safety edict that this flask never is heated when covered or capped with a stopper. It build-up pressure and can result in an explosion.
Scoopula is often used to transfer solids to different locations.
you can use an Erlenmeyer flask to place liquid samples or to catch filtrates as a laboratory apparatus.
Utility Clamp resembles a couple of scissors often used to secure glassware to a ring stand. it has a screw in the middle that is used to widen the adjustments between two-prong. ring stand or retort stand is attached to it. round laboratory glassware is held e.g flasks and beakers etc. with the help of Utility Clamp. there are three major parts of Utility Clamp:
Ring Stand is helpful as a laboratory apparatus for holding or clamping different lab glassware so that it does not fall down.
they have been used for the addition of liquids/solutions in the shape of drops.
It is made of wood, polythene, or steel on which test tubes can be placed in an upright position. Test Tubes are normally held in a test tube rack. Test Tube Racks are specifically designed for this purpose. If these test tubes become risky to touch with bare hands (in a case due to heat or some other reason); test-tube tongs are used to move them.
the use of Clay Triangles is seen very rare but here we can’t miss an opportunity to describe every single opportunity to discuss every apparatus. Clay Triangles are placed on a ring that is attached to a stand that provides support to funnel, evaporating dish or crucible, etc.
Ballance is Used to measuring different small masses.
alcohol burner is an important part of laboratory equipment. it is used to produce an open flame using alcohol as a burning source.
When it comes to creativity, you might ask yourself whether or not you can feel…
In the dynamic landscape of India, where tradition and technology frequently intersect, the domain of…
In this article, we will provide a comprehensive explanation of IMDb's basic information, simple usage…
Boostcraft.net is your one-stop destination for all your WoW retail boost needs. Our team of…
California's logistics and warehousing industry has experienced tremendous growth over the years. With the increasing…
In recent years, the food and beverage industry has witnessed a significant shift towards digitization,…
View Comments
Thanks to the great guide
I think the admin of this web site is genuinely working hard for his website, for the reason that here every data is quality based material.
We always try for quality based material.
Thank You for Comments.
Enjoy.
I'll immediately clutch your rss feed as I can not to find your e-mail subscription link or newsletter service. Do you've any? Please let me recognise so that I may subscribe. Thanks.
We have no E-Mail Subscription Link or Newsletter Service yet.
please, bookmark our website.
Thanks of comment!
Ilove it
I spent a lot of time to find something like this
We hope that it fulfill your needs.
Thank You.
Judging what I read, I could say the information was accurate. But judging what I didn't read.. shouldn't there be things like tubes and pipes? Part of the basics ain't they?
the question is, they are the part of laboratory apparatus or not? if yes then they should be on the list. thanx
Great work Sir. keep it up.
Thank you so much sir,
Please send more
Please add more equipment and their uses
sure, I will add it soon. please check back in a few days later.
Thanks for informing